Alley Scrapers Jamesway Alley Cat™ XD-260 Alley Scraper Used in smaller to medium sized barns, the XD-260 has a 26” diameter drum, giving a maximum stroke of 230 feet using 3/8” cable or 165 feet using ½” cable. The 18” wide drum is ¼” thick and runs on pillow block bearings. The #80 roller chain on the drum is powered by a standard-duty gearbox featuring a self-aligning outboard bearing to handle heavy loads. The XD-260 is equipped with the same great features found on the bigger units. ..1.5” diameter guide screws with external greasing, easy access covers, easy access motor mount, and the ultra-reliable smart switching system. The Alley Cat 260 drive unit is ideally suited for scraping small to medium sized barns. Features include: • 1 HP electric motor (single or three phase) • #60 roller chain drive and 26” diameter drum • 235’ maximum scraped alley length with 3/8” cable and one blade • 470’ maximum scraped alley length with 3/8” cable and two blades per alley • Reversing switch automatically changes blade direction • T-bar switch protects drive unit from double wrapped cable • Hinged cover for easy service access Electric Motor: 1 H.P. Cable Type: 3/8" or 1/2" Galvanized or Stainless Steel Maximum Alley Scrape Length: 3/8" Cable - 235'; 7/16" Cable - 195'; 1/5" Cable - 165' Drum Size: 26" Diameter x 18" Width Drum Bearings: 1-1/2" Oilite Bronze Bushing Drive Chain: #60 Roller Chain Gearbox: 60:1 Reduction Gearbox, Oil Bath, Cold Service Lead Screw: 1" Diameter Steel, Acme Thread Lead Screw Chain: #40 Roller Chain Drive Unit Safety Switch: Drum Switch Automatically, Shuts Off Motor if Cable Wraps Double-wraps Alley Widths: 7' thru 16' Scraper Blade Type: Tie-Up Straight Blade with Wings or Folding V-Blade Control Unit: Includes Automatic Timer; Current Monitor to Sense Obstructions and Motor Overload Protection Corner Wheels: 19" Diameter Cast Iron Corner Wheels, with Greasable; Taper Roller Bearings and Triple Seals Jamesway Alley Cat™ XD-480 Alley Scraper Used in medium to large sized barns, the XD-480 has a 48” diameter drum, giving a maximum stroke of 440 feet using 3/8” cable, or 350 feet using 7/16” cable or 325 feet using ½” cable. The XD-480 is recommended for barns up to 650 feet long using 2 blades per alley. The 18” wide drum is 5/16”” thick and runs on heavy duty cast flange bearings. The #80 roller chain on the drum is powered by a super-duty gearbox able to handle the heaviest loads. As with all XD-Series, the XD-480 is equipped with external greasing for the 1.5” diameter guide screws, easy access covers, easy access motor mount, and the ultra-reliable smart switching system. The Alley Cat 480 drive unit is ideally suited for scraping medium to large sized barns. Features include: • 1 HP electric motor (single or three phase) • #80 roller chain drive and 48” diameter drum • 325’ maximum scraped alley length with 1/2” cable and one blade • 650’ maximum scraped alley length with 1/2” cable and two blades per alley • 1,250’ maximum scraped alley length with 1/2” cable and four blades per alley • Reversing switch automatically changes blade direction • T-bar switch protects drive unit from double wrapped cable • Hinged cover for easy service access Electric Motor: 1 H.P. Cable Type: 3/8" or 1/2" Galvanized or Stainless Steel Maximum Alley Scrape Length: 3/8" Cable - 440'; 7/16" Cable - 350'; 1/5" Cable - 325' Drum Size: 48" Diameter x 18" Width Drum Bearings: 2" ID X 4-Bolt Flange Drive Chain: #80 Roller Chain Gearbox: 60:1 Reduction Gearbox, Oil Bath, Cold Service Lead Screw: 1" Diameter Steel, Acme Thread Lead Screw Chain: #40 Roller Chain Drive Unit Safety Switch: Drum Switch Automatically, Shuts Off Motor if Cable Wraps Double-wraps Alley Widths: 7' thru 16' Scraper Blade Type: Tie-Up Straight Blade with Wings, or Folding V-Blade Control Unit: Includes Automatic Timer, Current Monitor to Sense Obstructions and Motor Overload Protection Corner Wheels: 19" Diameter Cast Iron Corner Wheels, with Greasable, Taper Roller Bearings and Triple Seals